家乐福 Shell Helix Ultra

trijuta

买到来要过200吗？
振杰 发表于 22-2-2012 04:34 PM

呵呵～那就不必。。

振杰

你告诉我是在哪一间的先，我看方不方便去看看。
bigfrog2301 发表于 22-2-2012 06:25 PM

   Johor

振杰

rm105fully castrol or shell是不可能的事，你搞错货或者market搞错了！
缘分的天空 发表于 22-2-2012 07:14 PM

   几天促销罢了。。。现在都没有了

振杰

呵呵～那就不必。。
trijuta 发表于 22-2-2012 09:14 PM

   没有在小新的朋友叻

trijuta

没有在小新的朋友叻
振杰 发表于 23-2-2012 01:56 PM

你想买fully油用在什么车,旧车还是新车？我的是fully5w50，是耐高温+高转速。。所以别买错油。给你一些资料，是英文的如下：-
______________________________________________________________________________
"Oil thins when heated and thickens when cooled. Choosing the proper viscosity grade for the ambient temperature of your geographic location is therefore vitally important.
A monograde is an oil whose viscosity is defined at only one temperature, either high or low. A multigrade must meet both high and low temperature viscosity requirements simultaneously.
This makes multigrades an easy and popular year-round choice for drivers who experience hot summers and harsh winters. Multigrades are easily recognized by the dual viscosity designation (i.e. 10W-30 where the 10W is the low temperature or winter designation and the 30 is the high temperature designation). It is the viscosity modifier additive that produces a thickening effect at high temperatures but is dormant at low temperatures.
Which viscosity grade is right for you?

SAE Viscosity Grade Motor Oil: 5W-30
Temperature Conditions: Below 0° F
Descriptions: Provides excellent fuel economy and low temperature performance in most late-model automobiles. Especially recommended for new cars.

SAE Viscosity Grade Motor Oil: 10W-30
Temperature Conditions: Above 0° F
Descriptions: Most frequently recommended viscosity grade for most automobile engines, including high-performance multivalve engines and turbo-charged engines.

SAE Viscosity Grade Motor Oil: 10W-40 - Castrol Magnatec
Temperature Conditions: Above 0° F
Descriptions: The first multigrade introduced. A good choice for controlling engine wear and preventing oil breakdown from oxidation. Note: Always check your owner's manual or warranty requirements before using this grade.

SAE Viscosity Grade Motor Oil: 20W-50 - Castrol GTX Extra
SAE Viscosity Grade: 20W-50 Temperature Conditions: Above 20° F
Descriptions: Provides maximum protection for high-performance, high-RPM racing engines. Excellent choice for high temperature and heavy loads such as driving in the desert or towing a trailer at high speeds for long periods of time.

SAE Viscosity Grade Motor Oil: SAE 30 & SAE 40
Temperature Conditions: Above 40° F & Above 60° F
Descriptions: For cars and light trucks, where recommended by manufacturers. Not recommended when cold-temperature starting is required.
Note: It is important to consult your vehicle handbook to establish the correct grade for your car and environment."
______________________________________________________________________________